Skip to content
FiftyCalc Free calculators for all 50 states

Bolt Circle Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the bolt circle diameter, the number of holes and the start angle; pick a hole number to get its coordinates.

Result

Sample figures

Center-to-center distance between adjacent holes—

Angle between holes (degrees) —

  • Angle of the chosen hole (degrees)—
  • X of the chosen hole—
  • Y of the chosen hole—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Bolt Circle Calculator

Bolt circle diameter (inches or mm): enter 0 or more. Prefilled example: 4.5.

Number of holes: enter 2 or more. Prefilled example: 5.

Angle of hole 1 (degrees from +X, counterclockwise): enter a number. Prefilled example: 90.

Hole number for coordinates: enter 1 or more. Prefilled example: 1.

Center X: enter a number. Prefilled example: 0.

Center Y: enter a number. Prefilled example: 0.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Bolt circle diameter (inches or mm): enter 0 or more.
  2. Number of holes: enter 2 or more.
  3. Angle of hole 1 (degrees from +X, counterclockwise): enter a number.
  4. Hole number for coordinates: enter 1 or more.
  5. Center X: enter a number.
  6. Center Y: enter a number.
  7. Read the result: Center-to-center distance between adjacent holes; the panel also shows Angle between holes (degrees), Angle of the chosen hole (degrees), X of the chosen hole and Y of the chosen hole.

How this calculator works

Holes are equally spaced, 360° ÷ n apart. Hole k sits at angle start + (k − 1) × 360° ÷ n, at X = center X + r × cos(angle) and Y = center Y + r × sin(angle), with r = diameter ÷ 2.

The straight-line distance between adjacent holes is the chord D × sin(180° ÷ n). Use any unit; the coordinates come out in the same unit.

The formula

  1. C=D×sin⁡(πn)
Symbols used in the formula
SymbolMeaningUnit
DBolt circle diameterinches or mm
nNumber of holes
CCenter-to-center distance between adjacent holes

Worked example

Bolt circle diameter (inches or mm)4.5
Number of holes5
Angle of hole 1 (degrees from +X, counterclockwise)90
Hole number for coordinates1
Center X0
Center Y0
Angle between holes (degrees)72
Angle of the chosen hole (degrees)90
X of the chosen hole0
Y of the chosen hole2.25
  1. C=4.5×sin⁡(3.141595)=2.64503

Center-to-center distance between adjacent holes 2.645

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the hole spacing of a 5 × 4.5 inch wheel bolt pattern?

4.5 × sin(36°) = 2.645 inches center to center.

How do I measure a 5-lug bolt circle?

Measure from the center of one stud to the far edge of the stud across from it; this approximates the diameter for an odd number of studs.

Related calculators