Skip to content
FiftyCalc Free calculators for all 50 states

Countersink Depth Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the countersink diameter wanted at the surface, the hole diameter and the countersink angle.

Result

Sample figures

Countersink depth—in

Countersink depth (millimeters) —

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Countersink Depth Calculator

Units: switches the fields between the two unit systems.

Countersink diameter at the surface, in in: enter 0 or more. Prefilled example: 0.5.

Hole diameter, in in: enter 0 or more. Prefilled example: 0.25.

Countersink angle (included): choose 82° (US inch flat-head screws), 90° (metric flat-head screws), 100° (aerospace rivets) or 120°. Prefilled example: 82° (US inch flat-head screws).

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for countersink drill bits. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Countersink diameter at the surface, in in: enter 0 or more.
  3. Hole diameter, in in: enter 0 or more.
  4. Countersink angle (included): choose 82° (US inch flat-head screws), 90° (metric flat-head screws), 100° (aerospace rivets) or 120°.
  5. Read the result: Countersink depth; the panel also shows Countersink depth (millimeters).

How this calculator works

A countersink is a cone. Its depth below the surface, down to where it meets the hole, is (countersink diameter − hole diameter) ÷ 2 ÷ tan(angle ÷ 2), with the included angle.

Inch flat-head screws use an 82° head (ASME B18.6.3), metric ones 90° (ISO 10642, ISO 7046).

The formula

  1. De=(D−d2)÷2tan⁡(rad⁡(ang2))
Symbols used in the formula
SymbolMeaningUnit
DCountersink diameter at the surfacein
d2Hole diameterin
angCountersink angle (included)
DeCountersink depthin
rad(x)the angle x, converted from degrees to radians.

Worked example

Countersink diameter at the surface0.5 in
Hole diameter0.25 in
Countersink angle (included)82° (US inch flat-head screws)
Countersink depth (millimeters)3.65
  1. De=(0.5−0.25)÷2tan⁡(rad⁡(822))=0.143796

Countersink depth 0.1438 in

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How deep is a 1/2-inch, 82° countersink on a 1/4-inch hole?

0.125 ÷ tan(41°) = 0.1438 inch.

Why does the angle matter?

A screw head seats fully only in a countersink of the same angle; a mismatch bears on a narrow ring.

Related calculators