Press Brake Tonnage Calculator
Test cases replayed : 3 of 3 match · Methodology · No outside source listed
Enter the sheet thickness, the V-die opening, the bend length and the material's tensile strength.
Result
Press brake tonnage (tons)
Force per foot of bend (tons)
- Die opening ÷ thickness
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Material thickness, in in: enter 0 or more.
- Die opening, V width, in in: enter 0.001 or more.
- Bend length, in in: enter 0 or more.
- Tensile strength (60,000 is the formula's base steel), in psi: enter 0 or more.
- Bending method: choose Air bending (×1), Bottom bending (×5) or Coining (×10).
- Read the result: Press brake tonnage (tons); the panel also shows Force per foot of bend (tons) and Die opening ÷ thickness.
How this calculator works
Air bending tonnage per foot = 575 × thickness² ÷ die opening (inches), based on AISI 1035 cold-rolled steel of 60,000 psi tensile strength. Total = per foot × bend length ÷ 12, times a material factor (tensile strength ÷ 60,000) and a method factor (1 for air bending, 5 and more for bottoming, 10 and more for coining).
Formula and factors read on 2026-10-27 on Bystronic, How to calculate press brake tonnage (https://bystronic.com/zaf/en/news/how-calculate-press-brake-tonnage); a die opening of about 8 times the thickness is common (Productivity Inc., press brake tonnage calculator, https://productivity.com/resource/calculators/press-brake-tonnage-calculator/).
The result is a guide: check it against the press and tooling ratings, which must not be exceeded per foot of tool.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Material thickness | in | |
| Die opening, V width | in | |
| Bend length | in | |
| Tensile strength (60,000 is the formula's base steel) | psi | |
| Bending method | ||
| Force per foot of bend | tons | |
| Press brake tonnage | tons |
Worked example
| Material thickness | 0.125 in |
|---|---|
| Die opening, V width | 1 in |
| Bend length | 120 in |
| Tensile strength (60,000 is the formula's base steel) | 60,000 psi |
| Bending method | Air bending (×1) |
| Force per foot of bend (tons) | 8.98 |
|---|---|
| Die opening ÷ thickness | 8.00 |
Press brake tonnage (tons) 89.84
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What tonnage to air bend 10 feet of 1/8-inch mild steel on a 1-inch die?
575 × 0.125² ÷ 1 = 8.98 tons per foot; × 10 feet = 89.84 tons.
How does stainless change it?
Multiply by its tensile strength ÷ 60,000; at 90,000 psi that is 1.5 times the steel figure.