Taper Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the large diameter, the small diameter and the length of the taper.
Result
Taper per footin
Taper per inch (inches)
- Half angle, compound rest setting (degrees)
- Included angle (degrees)
- Taper ratio, 1 : x
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Large diameter, in in: enter 0 or more.
- Small diameter, in in: enter 0 or more.
- Length of taper, in in: enter 0.0001 or more.
- Read the result: Taper per foot; the panel also shows Taper per inch (inches), Half angle, compound rest setting (degrees), Included angle (degrees) and Taper ratio, 1 : x.
How this calculator works
Taper per inch = (large diameter − small diameter) ÷ length; taper per foot = taper per inch × 12. The side of a taper rises (D − d) ÷ 2 over the length, so the half angle = arctan((D − d) ÷ (2 × L)) and the included angle is twice that.
Set the compound rest of a lathe to the half angle; set a taper attachment from the taper per foot.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Large diameter | in | |
| Small diameter | in | |
| Length of taper | in | |
| Taper per foot | in |
Worked example
| Large diameter | 1.25 in |
|---|---|
| Small diameter | 1 in |
| Length of taper | 3 in |
| Taper per inch (inches) | 0.0833 |
|---|---|
| Half angle, compound rest setting (degrees) | 2.3859 |
| Included angle (degrees) | 4.7719 |
| Taper ratio, 1 : x | 12.00 |
Taper per foot 1 in
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What is the taper per foot from 1.25 to 1 inch over 3 inches?
0.25 ÷ 3 × 12 = 1 inch per foot; half angle 2.3859°.
Is taper per foot on the diameter or the radius?
On the diameter: it is the change in diameter over 12 inches of length.