Skip to content
FiftyCalc Free calculators for all 50 states

Thread Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the nominal (major) diameter and the threads per inch; for 1/2-13 UNC, 0.5 and 13.

Result

Sample figures

Basic pitch diameter—in

Pitch (inches) —

  • Height of the sharp V, H (inches)—
  • Basic minor diameter (inches)—
  • Basic thread depth, 5/8 H (inches)—
  • Pitch (millimeters)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Thread Calculator

Major diameter, in in: enter 0 or more. Prefilled example: 0.5.

Threads per inch: enter 0.01 or more. Prefilled example: 13.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for tap and die sets. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Major diameter, in in: enter 0 or more.
  2. Threads per inch: enter 0.01 or more.
  3. Read the result: Basic pitch diameter; the panel also shows Pitch (inches), Height of the sharp V, H (inches), Basic minor diameter (inches), Basic thread depth, 5/8 H (inches) and Pitch (millimeters).

How this calculator works

Unified 60° thread (ASME B1.1 basic profile): pitch P = 1 ÷ threads per inch; H = √3 ÷ 2 × P; basic pitch diameter = D − 2 × 3/8 H = D − 0.649519 P; basic minor diameter = D − 2 × 5/8 H = D − 1.082532 P. Formulas read on 2026-10-27 on AmesWeb, Unified Thread Standard (https://amesweb.info/Screws/unified-thread-standard.aspx).

These are basic (zero-tolerance) sizes; the class of fit (2A, 2B, 3A…) takes allowances and tolerances away from them.

The formula

  1. P=1tpi
  2. H=32×P
  3. Pd=D−2×38×H
Symbols used in the formula
SymbolMeaningUnit
DMajor diameterin
tpiThreads per inch
PPitchinches
HHeight of the sharp V, Hinches
PdBasic pitch diameterin

Worked example

Major diameter0.5 in
Threads per inch13
Pitch (inches)0.0769
Height of the sharp V, H (inches)0.0666
Basic minor diameter (inches)0.4167
Basic thread depth, 5/8 H (inches)0.0416
Pitch (millimeters)1.9538
  1. P=113=0.0769231
  2. H=32×0.0769231=0.0666173
  3. Pd=0.5−2×38×0.0666173=0.450037

Basic pitch diameter 0.45 in

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the pitch diameter of 1/2-13 UNC?

0.5 − 0.649519 ÷ 13 = 0.4500 inch (basic).

What is the minor diameter of 1/4-20?

0.25 − 1.082532 ÷ 20 = 0.1959 inch (basic).

Related calculators