True Position Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the basic (nominal) location, the measured location and the diameter of the position tolerance zone.
Result
True position (diameter)
X deviation
- Y deviation
- Result
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Nominal X (inches or mm): enter a number.
- Nominal Y: enter a number.
- Measured X: enter a number.
- Measured Y: enter a number.
- Position tolerance, diameter of the zone: enter 0 or more.
- Read the result: True position (diameter); the panel also shows X deviation, Y deviation and Result.
How this calculator works
True position (diametral) = 2 × √(ΔX² + ΔY²), where ΔX and ΔY are the measured minus the basic coordinates. The factor 2 turns the radial distance from the true location into a diameter, matching the cylindrical tolerance zone of a position callout (ASME Y14.5). Read on 2026-10-27 on GD&T Basics, True Position (https://app.gdandtbasics.com/symbol/true-position).
Bonus tolerance at MMC or LMC is not added here: if the callout uses a material modifier, add the departure of the feature size from its MMC to the tolerance first.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Nominal X | inches or mm | |
| Nominal Y | ||
| Measured X | ||
| Measured Y | ||
| X deviation | ||
| Y deviation | ||
| True position (diameter) |
Worked example
| Nominal X (inches or mm) | 1 |
|---|---|
| Nominal Y | 1 |
| Measured X | 1.003 |
| Measured Y | 1.002 |
| Position tolerance, diameter of the zone | 0.01 |
| X deviation | 0.003 |
|---|---|
| Y deviation | 0.002 |
| Result | Within the position tolerance |
True position (diameter) 0.0072
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
Is a hole 0.003 off in X and 0.002 off in Y within a 0.010 position?
2 × √(0.003² + 0.002²) = 0.0072, so yes.
Why not just use the X and Y errors?
Position limits the radial distance in any direction; a square ±X, ±Y box would accept corners that are farther than the round zone.