Skip to content
FiftyCalc Free calculators for all 50 states

Welding Heat Input Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the arc voltage, the welding current and the travel speed of the weld.

Result

Sample figures

Heat input (kJ per inch)—

Heat input (kJ per mm) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Welding Heat Input Calculator

Arc voltage, in V: enter 0 or more. Prefilled example: 25.

Welding current, in A: enter 0 or more. Prefilled example: 200.

Travel speed (inches per minute): enter 0.01 or more. Prefilled example: 10.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for welding supplies. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Arc voltage, in V: enter 0 or more.
  2. Welding current, in A: enter 0 or more.
  3. Travel speed (inches per minute): enter 0.01 or more.
  4. Read the result: Heat input (kJ per inch); the panel also shows Heat input (kJ per mm).

How this calculator works

Heat input (kJ/in) = volts × amps × 60 ÷ (1,000 × travel speed in in/min). This is the traditional method (a) of ASME Section IX QW-409.1, which AWS D1.1 also uses; read on 2026-10-27 on Material Welding, Heat Input in Welding (https://materialwelding.com/what-is-heat-input-in-welding-its-formula-online-calculator-and-unit/).

Waveform-controlled power sources use the measured energy or power instead (QW-409.1 methods b and c). European practice (EN 1011-1) multiplies arc energy by a process efficiency; this calculator does not.

The formula

  1. H=60×V×A1,000×S
Symbols used in the formula
SymbolMeaningUnit
VArc voltageV
AWelding currentA
STravel speedinches per minute
HHeat input (kJ per inch)

Worked example

Arc voltage25 V
Welding current200 A
Travel speed (inches per minute)10
Heat input (kJ per mm)1.1811
  1. H=60×25×2001,000×10=30

Heat input (kJ per inch) 30.00

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the heat input at 25 V, 200 A and 10 in/min?

25 × 200 × 60 ÷ (1,000 × 10) = 30 kJ/in, or 1.18 kJ/mm.

Does a faster travel speed lower heat input?

Yes: heat input is inversely proportional to travel speed.

Related calculators